Samsung Galaxy Note 3 SM-N900-Android 4.3 Jelly Bean Firmware Download Now

 

1. Download CF-Auto-Root for Galaxy Note 3 N900 and extract the Zip file: CF-Auto-Root-t03g-t03gxx-gtN900.zip
2. Download Odin 3 v3.09 from here or here.here .
3. Now, Switch off your phone and boot Galaxy Note 3 N900 into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Note 3 N900 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, click on the AP button and select the CF-Auto-Root-t03g-t03gxx-gtN900.tar.md5 file.
9. Finally, click on the Start button to begin the rooting process, wait few moments.
10. Once completed, you would see “PASS!” message in ID:COM port having green background
11. Your phone should automatically reboot after completion
12. You can now disconnect your phone from computer
13. Finish